How To Protect Your Electrical Equipment With An ATS

Automatic transfer switches are made for a variety of standby power applications for both normal and heavy power loads. They maintain constant monitoring of voltage levels on the electrical circuit and they are applied during an outage to protect the power. They are also used to monitor the emergency power sources, thereby decreasing the risk of any kind of equipment damage. They are quite complex, so if you want to understand them you will need an automatic transfer switch diagram.

These switches, in the event of a normal power disturbance, automatically transfer the load circuits to the emergency power source. So, when normal power sources have been reinstated, the procedure is automatically preserved. They are also used to shut down the power from the main line before it turns the generator or alternative sources of power on. Most places still use manual switches, but an automatic power switch is safer and is better at handling power problems. If you are planning to install these switches, you should keep in mind that the utility lines have to be checked. The lines also have to be proven safe even after the installation is carried out.



People often use UPS (uninterrupted power supply) devices to keep working during power cuts. The UPS is great for short-term use, but cannot provide continuous power supply in the case of long power cuts or brownouts. In this case, an ATS is useful as it quickly and efficiently transfers the load circuit from the regular source of power to an emergency or alternative source. ATS are also used to protect the power in the case of an outage. They can maintain constant voltage levels on the electrical circuit, thus protecting your precious electrical equipment such as computers, refrigerators, televisions, etc. from voltage spikes and other electrical disturbances. An automatic transfer switch diagram is useful for understanding how an ATS works. It is unique for each and every building or apartment.

They cover applications ranging from 200 amperes to more than 5000 amperes. This covers basic electrical items to advanced industrial products. The switch detects anomalies such as brownouts, voltage sags, surges and spikes, automatically commanding the generator to start up and provide power to the affected outlets. If you are interested in installing an ATS in your office or building, it is a good idea to start online. There are many websites that are selling these devices. They also provide information based on your needs. You should also contact professional electricians if you are interested in protecting your equipment. They will be able to provide you with tailored information, relating specifically to your situation and circumstances. An electrician will also install the device for you, thereby saving you from going through all the hassle of working with dangerous electrical products.

Before you decide on installing an ATS, you should formulate an automatic transfer switch diagram to help you figure out which outlets and electrical items need protection the most. An ATS is indispensable if your area faces regular electrical disturbances. It will save you money in the long run.